Blog

How to assemble a wardrobe: from the first pieces to adjusting the doors

14 de November, 2026

White wardrobe with doors and a mirror

A wardrobe can look finished once it is standing, but decisions that affect everyday use are still left: levelling the frame, fixing it properly and adjusting the doors and drawers. A small deviation at the start can later turn into doors that rub or uneven gaps.

The photographs show different stages of wardrobe assembly, to help you understand the process before you start. The guide is for orientation: the type of joint, the assembly order and the anchors depend on the model and on the wall in the home.

1. Measure the space and check how it will be assembled

Measure the available width, depth and height, including skirting boards and obstacles. If the manual tells you to assemble the wardrobe lying down and then stand it up, also check the height needed for that manoeuvre. Leave room to open the doors and drawers. Do not improvise a vertical assembly if the instructions do not allow it.

Preparing wardrobe panels before forming the frame
Preparing the parts before assembling the wardrobe.

2. Sort the panels, fittings and tools

Identify the base, top, sides, dividers, back panels and doors. Check the visible finish and the drill holes before fitting dowels or cam locks. Keep hinges, runners and screws separated by group. Work on a protected surface and get help to handle tall panels.

3. Assemble the carcass and check it is square

Follow the sequence in the manual and check that the joints seat without being forced. A badly placed back panel can leave the carcass out of square; check its position before you fix it for good. Do not add holes or cut-outs to compensate for parts fitted the wrong way round.

Wood-finish wardrobe with the frame and interior during assembly
Frame of a wardrobe during work on its interior.

4. Level it and fit the anti-tip fixing

Move the unit into position following the model’s instructions and check that it is level. Use the anti-tip system provided and fixings suited to the wall. Before you drill, check the substrate and whether hidden services may be present. If you do not know the wall material or how to choose the anchor, ask a professional for help.

The fixing deserves attention even when the wardrobe seems stable. IKEA recommends using the product’s anti-tip devices and choosing the fixings according to the wall type. That recommendation does not identify the brand of the furniture in these photographs.

5. Fit the shelves, rails and drawers

Keep supports and runners in the positions set out in the instructions. Check that the shelves are supported and that the drawers move without rubbing. Maximum loads depend on the manufacturer; they cannot be inferred from the size of the furniture or from a photograph.

Assembling drawers in the lower part of a wardrobe
Work on the lower drawer area before the wardrobe is complete.

6. Fit the doors and adjust the gaps

On hinged doors, adjust the hinges following the manual until the gaps are even. On sliding doors, use the specific procedure for runners, carriages and stops. Open and close each leaf, check the handles and make sure no door hits another part.

White wardrobe with doors and a mirror fitted in a bedroom
Example of the exterior finish of another wardrobe, with doors and a mirror.

What to check if the doors sit crooked

Start with whether the carcass is level and square, then check the hinges or runners. Adjusting a door without correcting an unlevel frame can hide the problem for a while. If parts are warped or fixings are damaged, do not keep tightening to compensate.

Safety reference: IKEA: fixing furniture to the wall. Always check the instructions for that specific wardrobe.

Your experience can help other people too

What problem have you run into when assembling a wardrobe: lack of space, misaligned doors or parts that are hard to identify? Tell us on WhatsApp or comment on our Instagram posts. Your experience can help us prepare new guides for the community.

In the CasaFix community we want to share practical ways to assemble, transport and look after furniture. Follow us on Instagram and tell us which guide you would like to see next.

Would you rather enjoy the furniture and leave the assembly to a professional?

Ask CasaFix in Barcelona and Badalona about assembling your wardrobes. Send us photos of the furniture, the brand or model, the area and your preferred date. With those details we can assess the job and confirm availability.

Ask about my assembly on WhatsApp

You can also see our furniture transport and assembly service in Barcelona. Not ready for it yet? Save this guide or share it with someone who is refreshing their home.

More assembly guides for your home

If you are preparing other furniture, these guides can help you organise the work:

Tell us which service you need

Tell us the furniture, the access and the date so providers can assess the job.

Request quotes

Have a question? Contact CasaFix.