A bunk bed helps you make better use of the bedroom, but assembling it needs particular attention to stability, the guard rails and the ladder. The aim is not only to get the pieces to fit: the whole unit must be ready for the use the manufacturer intended.
This series of photographs shows a wooden bunk bed at different stages of the work. The brand and the model reference have not been verified, so no tightening torques, loads or specific measurements are given. Check those in its manual.
1. Check the location, the manual and the mattresses
Measure the bedroom and the clear height above the top bunk. Check the distances to walls, windows, fans and other obstacles as specified by the manufacturer. Identify compatible mattresses and the maximum thickness allowed for the top bunk before you buy or reuse one.

2. Identify the headboards, side rails and fittings
Separate the components of each bed, the guard rails, the ladder, the supports and the screws. Check the orientation of the drill holes on the drawing. Do not replace safety parts with similar pieces, and do not start if fixings are missing. Keep the work area clear and get help with the bulky parts.
3. Assemble the frames following the sequence
Assemble the sections in the order the manufacturer states, checking that each joint seats properly. Lifting or connecting the levels means you must control the weight and stability of the unit. Do not let anyone climb on it while the frame is incomplete.

4. Fit the guard rails and the ladder
Install every protection part that is specified, including on the wall side when the design requires it. Fix the ladder in its approved position and check its joints. The wall does not replace a guard rail that is part of the manufacturer’s design.

5. Fit the supports and the slats
Follow the layout and fixing of slats or platforms specified for each level. Check that no parts are missing and that every end is supported and fastened as required. A photograph of an assembled frame is not enough to verify its load capacity.

6. Carry out the final check before use
Check the screws, joints, guard rails, ladder and supports following the manual. Fit only compatible mattresses and check that they do not go above the height mark indicated. Follow the schedule of periodic checks and the manufacturer’s limits of use.

Precautions of use you should not forget
The top bunk is not suitable for children under six. Do not hang ropes, belts or anything that could trap a child. Use the ladder and avoid jumping and playing on the upper level. Correct assembly always has to go together with the model’s conditions of use.
Reference: IKEA safety warnings for a high bed. It is used as a general safety reference, not as identification or as the manual of the bunk bed in the photographs.
Your experience can help other people too
Are you preparing a shared room? Tell us what questions you have about the space, the ladder or choosing the mattress. Tell us on WhatsApp or comment on our Instagram posts. Your experience can help us prepare new guides for the community.
In the CasaFix community we want to share practical ways to assemble, transport and look after furniture. Follow us on Instagram and tell us which guide you would like to see next.
Would you rather enjoy the furniture and leave the assembly to a professional?
Ask CasaFix in Barcelona and Badalona about assembling your bunk beds. Send us photos of the furniture, the brand or model, the area and your preferred date. With those details we can assess the job and confirm availability.
Ask about my assembly on WhatsApp
You can also see our furniture transport and assembly service in Barcelona. Not ready for it yet? Save this guide or share it with someone who is refreshing their home.
More assembly guides for your home
If you are preparing other furniture, these guides can help you organise the work:
Tell us which service you need
Tell us the furniture, the access and the date so providers can assess the job.
Request quotesHave a question? Contact CasaFix.